Path: EDN Asia >> News Centre >> Industrial/Mil/Aero >> Ultrathin insulation layer developed using REBCO compound
Industrial/Mil/Aero Share print

Ultrathin insulation layer developed using REBCO compound

08 Oct 2013

Share this page with your friends

An ultrathin insulation layer that boosts the efficiency of magnetic coils based on the high-temperature superconducting compound REBCO has been developed by a team of researchers led by Hideaki Maeda from the RIKEN Centre for Life Sciences Technologies. The ultrathin insulation technology for superconducting wires could hold the potential for smaller and more efficient superconducting magnets for medical and industrial applications.

Wire coils made out of REBCO, a rare-earth barium copper oxide, are capable of withstanding the intense stresses that occur when the magnet charges, allowing them to produce stronger magnetic fields than traditional superconducting wires. However, REBCO does not yet perform efficiently because it requires a thick electrical insulation layer, which lowers the maximum current density of the conducting coil that can be produced.

"The REBCO wires themselves are very thin, between 100 and 150µm, but conventional layers of electrical insulation are about the same thickness. This reduces the effective amount of superconducting wire in every coil," explained Maeda. "To achieve a higher current density in smaller coils, the insulation layer needs to be much thinner."

The research team used a technique called electrodeposition to coat the REBCO wires with a uniformly thin layer of polyimide insulation. The process involves immersing wire in a bath of polyimide colloidal solution and establishing an electric field between the wire and an electrode in the bath. The electric field causes the polyimide particles to migrate to the wire and coat the superconductor's surface.

Baking the wire in a furnace for a few minutes to harden the polyimide coating produced a conductor that was coated uniformly with an ultrathin layer of insulation ten times thinner than any previous insulation layer.

image name

Figure 1: REBCO wires with an ultrathin insulation layer (left) provide double the current density of conventionally insulated REBCO wires (centre).
Source: Hideaki Maeda, RIKEN Centre for Life Science Technologies, 2013.

"With this new REBCO superconducting wire, we can achieve a current density that is double that of a conventionally insulated REBCO coil. We can also make the coils five times smaller than before," explains Maeda. "As a result, the conductor can generate higher magnetic fields with smaller devices, opening up new potential applications."

The researchers believe that their new REBCO coils could make it possible to produce a nuclear magnetic resonance spectrometer capable of generating magnetic fields stronger than 23.5T, the magnetic field limit for conventional superconducting wires.




Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact