Path: EDN Asia >> News Centre >> Automotive >> Magnetic sensor revenue to rise to 6 per cent by year end
Automotive Share print

Magnetic sensor revenue to rise to 6 per cent by year end

22 Oct 2013

Share this page with your friends

According to the latest report from IHS, semiconductor magnetic sensors are on track to attain 7 per cent revenue growth this year due to the widespread adoption in the automotive sector. Magnetic sensors are used to track rotational speed and linear angles in machines and devices, or to detect and process magnetic fields to establish positioning.

The global market revenue for magnetic sensors is expected to reach $1.73 billion by year-end, up from $1.62 billion in 2012. Next year will see revenue expand again by approximately 7 per cent to reach $1.85 billion, with growth continuing during the following three years ranging from 4 to 8 per cent. By 2017, industry takings will amount to some $2.20 billion.

"More than 5 billion magnetic sensors and switches were sold last year, with automotive accounting for 52 per cent of revenue and the consumer and mobile sector making up another 37 per cent," said Richard Dixon, IHS' principal analyst for MEMS and sensors. "The rest was in industry, energy, medical and other smaller applications, such as the transport, aerospace and maritime sectors."

In the past, the sensors enjoyed a remarkable run of growth, helped to some degree by their key role in vehicle safety systems required by mandates. For instance, electronic stability control (ESC) systems engineered to help prevent vehicle skidding were a potent driving force in consumption, given the use of relatively expensive steering-wheel-angle sensors and at least four wheel-speed sensors.

ESC mandates helped propel the sensors towards rapid growth during the last several years, especially as they were being enforced in the highly developed automotive markets of the United States, Canada, the European Union, Australia, South Korea and Japan.

Overall, Hall-type IC sensors and switches remain the most prominent magnetic sensor device, making up a whopping 89 per cent of market revenue in 2012. Applications for Hall sensors include wheel-speed sensing in anti-lock brake systems; acceleration pedals; electronic throttle valve position; crankshaft sensing; and exhaust gas recirculation. In addition, there are as many as 30 applications for simple switches in the body of the vehicle—Hall-effect sensors dominate in this low-cost switch category.

Given the saturation of Hall-type devices, however, growth is coming from other areas, including anisotropic magnetoresistance (AMR), giant magnetoresistance (GMR) and tunnelling magnetoresistance (TMR), Dixon noted. The change in technology mix is driven more by consumer applications—such as in electronic compasses—than by the automotive segment, which remains conservative in its implementation of new sensors. TMR devices could eventually enter the automotive market because of better performance compared to AMR and Hall ICs, but this won't occur before the 2017 time frame.

Magnetic sensors as a whole seek to capture a wide range of measurements. For instance, the sensors gauge field or compass dimension in mobile and consumer applications. Meanwhile, both switches and linear sensors are used in cameras and cell phone displays—switches for handling simple on-off functions; linear sensors for autofocus and image stabilisation.

Other measurements dependent on magnetic sensors comprise speed and position sensing in industrial motor applications, as well as current sensing in motors used in hybrid electric vehicles.

The Top 10 suppliers of magnetic sensors account for 87 per cent of industry revenue. Leading the pack is Asahi Kasei Microsystems of Japan on the strength of Hall-based electronic compasses for mobile handsets and tablets. AKM is followed, in order, by No. 2 Massachusetts-based Allegro Microsystems; Infineon Technologies of Germany in third place; Micronas of Switzerland in fourth; and Belgium-based Melexis in fifth.

Other important suppliers are NXP of the Netherlands, Yamaha and Alps Electric, both from Japan; the American-Austrian manufacturer AMS and Diodes from Texas.




Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact