Path: EDN Asia >> News Centre >> Computing/Peripherals >> Testing the latest PCIe Gen3 disk drive products
Computing/Peripherals Share print

Testing the latest PCIe Gen3 disk drive products

05 Aug 2014  | Craig Harriman

Share this page with your friends

At the forthcoming release of PCIe Gen3 disk drive products using the SFF-8639 connector (due out this year), discussions at the University of New Hampshire InterOperability Laboratory (UNH-IOL) reveal how these products will be tested.

The conversation focuses on whether there is a need to create a testing environment for the SFF-8639 specification beyond the current CEM specification.

When connectors, channel media, or channel lengths are changed, the electrical signal will behave differently. The more media changes you have, the more return loss will result. The energy loss will be significant after traveling from point to point, according to Josh Beaudet, the lead technical engineer for the UNH-IOL PCIe consortium.

"This weaker signal gives you a greater chance of bit errors," Beaudet said. "These bit errors can cause increases in latency, decreases in throughput, and the system is simply not going to perform as well as it could."

Early SFF-8639 implementers have been tested according to current PCI-SIG CEM tests. However, these tests are designed for the CEM connector, which is a slightly different environment from the electrical channel that will be used in many SFF-8639 implementations.

"For other high-speed serial interfaces, like SAS and SATA, we use a test fixture and test the signal right from the drive, without de-embedding the effects of the test fixture. It's not perfect, but with a high-quality test fixture, the effects are minimal," Beaudet said. "PCIe measurement relies on de-embedding the fixture to remove its effects on the signal during capturing. This can be done in PCIe, because the PCIe CEM test fixtures have been tested extensively. Their electrical characteristics are well known, and there is software for getting rid of their effects."

The PCIe CEM fixture has been heavily studied, and the community knows how it works, but that is not yet the case for SFF-8639. "We don't yet have a standard test fixture that they are going to de-embed out. So to compare apples to apples, on the SFF-8639, you need to remove the effects of the connectors and test fixtures."

With potentially longer cables and several additional connectors between the PCIe switch and the drive, the channels for PCIe signaling from SFF-8639 drives are different from the environment for which the CEM tests were originally designed. Research is under way to determine how different and reliable the CEM tests are in this new environment.

"Typically, these 2.5in PCIe disk drive implementations will need to route PCIe signals through an SFF-8639 connector and across a mid-plane, to another high-speed cable, then to the PCI switch," said David Woolf, senior technical staff member at the UNH-IOL. "While many of these components have been validated above 8Gb/s, testing them all together in system, or at least with a conformance test that mimics their behaviour together, is important."

Companies are always looking to develop and deliver the highest-quality products possible; they want to do it right on the first try, eliminating issues before the products reach the market. "Demand for this testing exists, and we should see movement and development on this as more SFF-8639 products enter the market," Woolf said.




Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact