Path: EDN Asia >> Design Centre >> IC/Board/Systems Design >> Designing envelope tracking modulator
IC/Board/Systems Design Share print

Designing envelope tracking modulator

12 Feb 2015  | Peter Markowski

Share this page with your friends

Envelope tracking technology is a well-known method of improving the efficiency of RF amplifiers operating with rapidly varying signal amplitude. The voltage source in an envelope tracking system is modulated to keep the RF amplifier as close as possible to the compression, where the efficiency is at its maximum (figure 1).


Figure 1: Envelope tracking principle of operation (left) and reduced bandwidth version (right).


The envelope tracking technique was described by Bell Labs in 1937. The similar techniques of envelope elimination and restoration were described by L. Kahn in 1951. Yet despite its obvious advantages, practical implementations were very rare simply because of the very high requirements imposed on a modulator. It has to combine very high bandwidth (up to 100MHz in some new systems) with high efficiency, small size, and low cost.

One of the ways to lower the bar is to reduce the bandwidth requirements. This is simple in implementation, but a significant portion of the potential efficiency improvement is lost (figure 2).


Figure 2: Envelope tracking with reduced bandwidth.


A different approach was proposed by Gunnar Cragfors in 1981 in U.S. patent no. 4,390,846, and later by Peter Garde in U.S. patent no. 4,516,080 (see the drawing from Cragfors' patent in figure 3). According to these inventors, modulator should consist of two parts: a switching regulator for low bandwidth and linear regulator for high bandwidth.


Figure 3: Linear regulator (F) and switching regulator (SW) combine for high-efficiency, high-bandwidth voltage modulation in Gunnar Cragfors' U.S. patent no. 4,390,846 (S – summing node).



1 • 2 • 3 • 4 • 5 Next Page Last Page


Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact