Path: EDN Asia >> Design Ideas >> Power/Smart Energy >> Performing precise LED simulation
Power/Smart Energy Share print

Performing precise LED simulation

07 Apr 2015  | Jon Roman, Donald Schelle

Share this page with your friends

Solid-state-lighting applications are rapidly moving into the mainstream. Although they are more efficient, the LEDs that produce the low-cost light often require a complicated driver circuit.


Figure 1: Us this circuit for quick testing of LED driver circuit over minimum, typical and maximum LED parameters.


Testing the driver circuit using LEDs, although easy, yields only typical results because the tests don't factor in worst-case LED parameters and often generate undesirable light and heat during driver debugging. Although using a constant resistance might seem to be an appropriate approach, a resistor approximates an LED load at only one point on the current/voltage curve. An electronic load may prove to be a more useful approach. The control loops of the driver circuit and the electronic load, however, often result in system instability and oscillations.


Figure 2: The simulated LED approximates the turn-on characteristics of a real LED. A constant-resistance load approximates a real LED load at only one point on the curve.


Figure 1 illustrates a typical LED-driver circuit using a low-cost simulated-LED circuit. The simulated LED accurately mimics a real LED at a user-programmable threshold voltage. A simple Darlington current sink, Q1, provides a wide range of LED threshold voltages. The size of the heat sink attached to Q1 and the power capability of Q1 are the only limits on the amount of power the simulated LED can dissipate.

You can easily tune the circuit for any LED voltage. Place a constant voltage across the simulated LED. Tune the circuit by adjusting resistor R1 until the circuit draws the desired current. You can adjust the shape of the voltage knee by making small changes to resistor R3, although this step is not usually necessary.

Figure 2 compares the simulated LED's current and voltage characteristics to those of a real LED and a constant resistance. The soft turn-on of the simulated LED accurately mimics that of a real LED. Furthermore, the simulated LED quickly retunes to test minimum and maximum LED characteristics, thus giving you confidence that the circuit will work over all load conditions.


About the author
Jon Roman and Donald Schelle are with National Semiconductor Corp.


This article is a Design Idea selected for re-publication by the editors. It was first published on October 7, 2010 in EDN.com.




Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact