Path: EDN Asia >> Design Ideas >> Power/Smart Energy >> Enable voltage clipping, dc shifting for flash ADC
Power/Smart Energy Share print

Enable voltage clipping, dc shifting for flash ADC

01 Apr 2016  | Alfredo del Rio

Share this page with your friends

Flash ADCs, such as National Semiconductor's ADC1175, typically have a recommended operating input-voltage range of 0.6 to 2.6V (Reference 1). However, in some applications, you must convert a symmetrical analogue-input signal. The circuit in this design idea converts a symmetrical input-voltage range of −0.2 to +0.2V into the recommended 0.6 to 2.6V range (figure). The circuit also prevents the output voltage from going below −0.3V, which would probably damage the ADC.


Figure: Adding R3 and D1to a conventional op-amp circuit provides clipping. R3, D1, R4, and R5 determine the clipping level. In addition, adding the IDC current causes dc-shifting of the output voltage.


The circuit uses an Analog Devices AD8002 dual-current-feedback operational amplifier to obtain a high bandwidth (Reference 2). The first block, noninverting amplifier IC1A has a voltage gain of five. This block also provides high input impedance and low output impedance, so that the second block, IC1B, operates properly. The second block does most of the work. Starting from a basic inverting amplifier comprising IC1B, R4, and R5, you obtain the clipping effect by adding R3 and D1. R3, D1, R4, and R5 determine the clipping level. In addition, adding the IDC current dc-shifts the output voltage. You can trim adjustable potentiometer resistor P1 to obtain the desired output voltage shift—that is, 1.6V.

If diode D1's current is negligible, the output voltage, VO, is −(1+R2/R1)x(R5/(R3+R4))xVI+VCCxR5/(R6+P1+R7)=1.6−5xVI. Given that the diode voltage, VDIODE, is 0.6VS, VO=−(R5/R4)xVDIODE+VCCxR5/(R6+P1+R7)=1.6−1.65=−0.05V.

The clipping takes place near 0V, protecting the ADC. Raising the clipping level makes the circuit less linear in the nonclipping range. In other words, a design trade-off exists between clipping level and linearity. Resistor R8 limits the current through the ADC's input pin. Capacitor C2 is optional; it limits the VADC/VI bandwidth. Capacitor C1 helps to reduce the voltage noise that might come from the −VCC power supply.


References
1. "ADC1175—8bit, 20MHz, 60mW A/D Converter," National Semiconductor.

2. "AD8002 Dual 600MHz, 50 mW Current Feedback Amplifier," Analog Devices.


About the author
Alfredo del Rio contributed this article.


This article is a Design Idea selected for re-publication by the editors. It was first published on April 3, 2008 in EDN.com.




Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact