Path: EDN Asia >> News Centre >> Communications/Network >> RF-powered IoT computing platform casts off batteries
Communications/Network Share print

RF-powered IoT computing platform casts off batteries

10 May 2016  | Elizabeth Montalbano

Share this page with your friends

Researchers at the University of Washington (UW), a few years back, have come up with wireless devices that are powered and communicate solely by harvesting signals from existing TV and cellular transmissions in the air. Back then, the innovation had notable implications for sensors, ultra-low-power devices, and other technologies that have since formed the basis for the Internet of Things (IoT).

Now, the research out of UW, together with researchers at Delft University of Technology, has expanded into the development of the Wireless Identification and Sensing Platform (WISP), a mini sensor-based computing platform that can be programmed to create IoT applications.

"It incorporates sensing, computing and communication, much like many wearables and IoT devices," said Aaron Parks, an electrical engineering student at UW.

WISP's sensors are powered and read by UHF RFID readers, harvesting power from the RF signal generated by the reader. The platform is an open source, open architecture EPC Class 1 Generation 2 RFID tag that includes a fully programmable 16bit MCU as well as arbitrary sensors, according to information on the website of the UW's Sensor Systems Laboratory, which is leading the research.

WISP is different than conventional RFID tags, in that the latter are black boxes that cannot execute arbitrary computer programmes and do not support sensors. In contrast, WISP is a mini computing platform that can be programmed to create not only sensing-related applications, but also apps in cryptography and security, according to researchers, who have given the platform to collaborators who are developing such applications.

RF-powered programmable sensing platform

Figure 1: Electrical engineers from University of Washington's Sensor Systems Laboratory and Delft University of Technology (TU Delft) have developed a programmable sensing platform that harvests energy from radio waves for electricity rather than uses a battery. (Source: University of Washington)

While these characteristics can be found in any computing platform, the real differentiator for WISP is that it doesn't need a battery to operate. "It does all this with no battery, and is entirely powered by radio waves that we beam at it from somewhere nearby," Parks said. "Being battery-free means the WISP has an unheard-of life expectancy of many decades, with no need for maintenance."

WISP could come in handy for numerous IoT applications, but especially for those in hard-to-access locations where replacing a battery would be difficult or near impossible, Parks said.

"We think the WISP is compelling in any application that's deeply embedded and hard to get to," he said. "So for instance, if one wanted to monitor the structural health of a building, one could put strain sensors on the WISP and embed it in the building materials themselves. The embedded WISPs could monitor strains and stresses, and determine when to alert the building's occupants. One could do this kind of continuous monitoring without the need to periodically extract the sensors to replace batteries."

But while WISP certainly could find its way into niche applications, it also is applicable to any type of system that requires computing and sensing power without the need for long-term maintenance. "It's also compelling as part of the bigger picture of the IoT, because nobody wants to have to worry about charging or replacing batteries in the hundreds of devices around their home or office," Parks said.

WISP runs on energy harvested from localised RF signals. However, the team's future research includes exploring how WISP and devices like it can harvest energy for so-called 'wild' radio energy, that is, energy that comes from ambient sources like TV towers and WiFi routers. "We're hoping to try and answer the question of whether ambient radio energy can power the future of the IoT," Parks added.




Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.


Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming


News | Products | Design Features | Regional Roundup | Tech Impact