Path: EDN Asia >> Design Ideas >> Power/Smart Energy >> Quashing 60Hz interference with a filter
Power/Smart Energy Share print

Quashing 60Hz interference with a filter

19 Apr 2013  | Adolfo Garcia

Share this page with your friends

The circuit in the figure filters 60Hz interference from low-frequency, low-level signals. The filter exhibits 40-dB rejection (Q=0.75) and draws 95µA max from a single-sided 5V supply.

Figure: This notch filter suppresses 60Hz interference in low-frequency signals.

Resistors R1, R2, and R3 and capacitors C1, C2, and C3 form a classic twin-T section, and IC1 and IC2 provide local and global feedback. The frequency selectivity (Q) and the rejection performance of this active filter are very sensitive to the relative matching of the capacitors and resistors in the twin-T section. Table 1 shows rejection and Q as a function of the value of RQ.

R4, R5, C4, and IC3 form a very-low-impedance reference source to bias IC1 and the twin-T section to half the supply voltage.

To configure the filter to operate at 60Hz, choose a Q that will provide enough rejection without excessive loss of desired low-frequency signals that may be close to the filter's notch frequency. The value of RQ is expressed as

The gain of the output amplifier is simply that of a conventional noninverting amplifier:

and the overall gain of the band-reject filter below and above the notch frequency is expressed as

If you need additional rejection, cascade filter sections. Keep in mind that you might have to modify the circuit to account for out-of-band gain multiplication.

About the author
Adolfo Garcia contributed this article.

To download the PDF version of this article, click here.

Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.

Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming

News | Products | Design Features | Regional Roundup | Tech Impact