Path: EDN Asia >> News Centre >> Industrial/Mil/Aero >> Consider convection in designing electronics for Antarctic
Industrial/Mil/Aero Share print

Consider convection in designing electronics for Antarctic

14 Jan 2014

Share this page with your friends

Bill Schweber of the Power Points blog looks into obstacles related to maintaining the right temperature for electronic equipment in the Antarctic, in response to an article entitled "Keeping equipment cool can be a challenge at Antarctic ground station" in the publication Physics Today. Schweber suggests that convection-cooling potential be taken into consideration when designing electronic products for the Antarctic.

Power-related design and management challenges often fall into two broad categories: those where the design is severely power-source limited (think energy harvesting/data logger); and those where thermal dissipation and heat buildup are the primary challenge (a large motor drive). Certainly, many designs have a combination of both power sourcing and dissipation constraints to resolve, but the two groupings are quite different, as the first has minimal thermal concerns, while the second is largely about thermal issues.

But there are cases where you assume that cooling will be little or no problem, despite the amount of heat that has to be dissipated—yet you would be wrong. That's why a reader's forum entry—"Keeping equipment cool can be a challenge at Antarctic ground station"—about the Marisat-GOES Terminal (SPMGT) and GOES backup antenna in the latest issue of Physics Today, about the challenge of keeping electronics cool enough in the Antarctic, was fascinating. That entry also called out a longer previous article—"The care and feeding of an Antarctic telescope"—which had details on another project, the High Elevation Antarctic Terahertz (HEAT) telescope, with a more-complicated power situation and more difficult thermal issues.

Consider convection in designing electronics for Antarctic

Figure 1: South Pole Marisat-GOES Terminal (SPMGT) and GOES backup antenna: the nine-meter antenna is a full-motion tracking antenna used to provide residents at Amundsen-Scott South Pole Station communication with the rest of the world.

My first thought when seeing that provocative first title was along the lines of "Really, what's the problem? Just open a window!" Of course, it's not that easy. You can't let the electronics get too hot or too cool, and there is other equipment in the enclosure that also has to be thermally managed. But the real thermal problem in the Antarctic is that the air is extremely dry, and so loses much of its convection capacity (whether natural-convection unforced or fan-driven forced type).

In the case of the Antarctic designs, the thermal assessment has to take the poor convection capacity of the air into account—and the problem is aggravated by the difference in this parameter's value versus altitude, as the air is much thinner. Thus, a thermal design that is fine at ground level may not work at higher altitudes. The telescope article notes that air at 4000m has about half the density it has at sea level—that's quite a difference.

This density-variation problem is not unique to the Antarctic, of course. Aircraft and spacecraft designers are well aware of it, and know that in the vacuum of space, there is no convection cooling; there is only radiation cooling.

But for nominally ground-based systems, the change in convention-cooling potential is something designers have to take into their modelling and design, but may overlook.

Have you ever had cooling problems where the variation from minimum to maximum for some ambient parameter or operational specification was the biggest challenge, much more so than the nominal situation?

Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.

Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming

News | Products | Design Features | Regional Roundup | Tech Impact