Path: EDN Asia >> Design Ideas >> IC/Board/Systems Design >> Load switch features self-resetting circuit breaker
IC/Board/Systems Design Share print

Load switch features self-resetting circuit breaker

03 Nov 2014  | Anthony Smith

Share this page with your friends

The simple current-limiting load switch shown in figure 1 will be familiar to most readers. In this circuit, a high level signal applied to the input switches on MOSFET Q2, which energizes the load. The load current is limited by negative feedback applied via Q1.

Figure 1: Simple, linear current limiter.

In most applications, the current flowing via R2 into Q1's base will be very small compared to the load current IL, so the voltage VCS developed across current-sensing resistor RCS is roughly equal to Q1's base-emitter voltage, VBE. Therefore, VBE ≈ VCS, and since VCS = ILRCS, it follows that VBE ≈ ILRCS, or IL ≈ VBE / RCS.

The value of RCS is chosen to limit the load current to a maximum value determined by IL(max) ≈ VBE(on) / RCS, where VBE(on) is the base-emitter voltage needed to bias Q1 into conduction. At room temperature, VBE(on) ≈ 650mV. So, for example, a value of RCS = 3.3Ω would set IL(max) to around 200mA.

Under normal, 'no-fault' conditions, where IL is within normal limits, VBE is too small to bias Q1 on, such that MOSFET Q2 remains fully enhanced by the high level signal applied to its gate via R1. Under these conditions, the load current is determined mainly by the load resistance and the supply voltage, VS. However, if a fault causes IL to approach IL(max), Q1 starts to conduct, and reduces Q2's gate-source voltage to a level that holds the load current roughly constant, at a value given by IL(max) ≈ VBE(on) / RCS.

This linear current limiter is very effective for applications where IL(max) and the supply voltage are not too large. However, the circuit's ability to limit the load current safely is determined by the power dissipated in Q2. For example, if RCS is selected to set IL(max) to 400mA and if VS = 12V, a short circuit across the load would dissipate almost 5W in Q2. Not only must Q2 be capable of handling this power with adequate margin, but additional heat-sinking may be required to keep its junction temperature at a safe level. Larger values of IL(max) and/or VS would simply exacerbate this problem.

However, by adding just two inexpensive components, you can adapt the circuit to provide effective current limiting with none of the power dissipation problems. The resulting Design Idea in figure 2 functions as a latching circuit breaker.

Figure 2: Load switch with circuit breaker protection.

To understand how the circuit works, assume that INPUT is high, Q2 is on, and normal current is flowing in the load. Under these conditions, the voltage across RCS is less than VBE(on), and so Q1 has insufficient bias to conduct fully. Any slight leakage current in Q1's collector is diverted away from Q3's base via R3 which clamps the PNP's base-emitter junction voltage to a few millivolts or less, thereby holding Q3 off. Provided the load current remains within normal limits, both Q1 and Q3 remain off and have no effect on Q2.

1 • 2 Next Page Last Page

Want to more of this to be delivered to you for FREE?

Subscribe to EDN Asia alerts and receive the latest design ideas and product news in your inbox.

Got to make sure you're not a robot. Please enter the code displayed on the right.

Time to activate your subscription - it's easy!

We have sent an activate request to your registerd e-email. Simply click on the link to activate your subscription.

We're doing this to protect your privacy and ensure you successfully receive your e-mail alerts.

Add New Comment
Visitor (To avoid code verification, simply login or register with us. It is fast and free!)
*Verify code:
Tech Impact

Regional Roundup
Control this smart glass with the blink of an eye
K-Glass 2 detects users' eye movements to point the cursor to recognise computer icons or objects in the Internet, and uses winks for commands. The researchers call this interface the "i-Mouse."

GlobalFoundries extends grants to Singapore students
ARM, Tencent Games team up to improve mobile gaming

News | Products | Design Features | Regional Roundup | Tech Impact